[Extra/Replacement] Wooden Clips
Individually hand milled in the United States of beautiful hardwoods, these clips hold the warping bar when warping your loom and then hold the shedding device if you're using it. These clips may be used as an extra set or to replace your clips if you're using the older, black plastic clips and want to switch to the wooden ones. These clips are sold as a pair.
This is how to put wooden clips on your loom:
Separate the top and the bottom parts of the loom (just slide the top part off of the bottom part). Some looms will have a bushing in the bottom of the copper tube with a flange at the bottom. Using a pair of flat nose pliers remove the bushing. Other looms will have a bushing without a flange, so they do not need to be removed because the clips can slide off the copper tubes without doing so. In either case, slide off the old clips if you are replacing them and/or slide new clips onto the copper bars. Replace the bushing if it was removed. Put the two halves of the loom back together.